Hi to all,
I wanted to test the scanner and i tried the Canon Eos 1200d ,100D and 700D with the eos utility 2.14 with no luck 
Andrew told me that they have done tests with 1000D,350D,400D,500D,550D,60D,7D.
So any thoughts on the subject? If i install an older version of eos utility (the one that comes with the 1000d,350d etc)maybe i got lucky?
Thank you for your time.
Hey! Wellcome to our forum and thank you for the feedback!
That seems strange… :-\
The possible reason is that the camera is busy by another application like EOS Utility. Please make sure you switched it off.
Also for the scanner to work you should have the memory card plugged into the camera.
Please let me know if it solves the problem
Well Andrew i did as you said with no luck.
Also when i go to File-New Project down in the output window says in red :
QAccessibleWidget::rect: This implementation does not support subelements! (ID -3 unknown for MainWindow)
QAccessibleWidget::rect: This implementation does not support subelements! (ID -48 unknown for MainWindow).
I noticed also that if i close and then open the power to my canon 700d down in the output window says : Camera added (in blue)
but nothing happens.All the settings (shutter,aperture,iso,delay)are not greyed anymore but they are empty (blank) and when i press the start live view (button) says that camera is not connected.
My system is Win7 Ultimate 64 bit with intel processor I7 2600 3.7Ghz , 8 Gb,
Cheers ,
Chris.
Also it seems that is a matter of older sdk .The new one supports more cameras
SDK’s Name: Canon EOS Digital SDK (EDSDK) v2.14 for Windows
Supported Camera: EOS-1D C / EOS 6D / EOS M / EOS M2()
EOS-1D X / 1D Mark III / 1Ds Mark III / 1D Mark IV
EOS 40D / 50D / 5D Mark II / 5D Mark III / 7D / 60D / 60Da / 70D
EOS Rebel XSi / 450D
EOS Rebel XS / 1000D
EOS Rebel T1i / 500D
EOS Rebel T2i / 550D
EOS Rebel T3i / 600D
EOS Rebel T4i / 650D
EOS Rebel T3 / 1100D
EOS Rebel T5i / 700D, EOS Rebel SL1 / 100D
EOS Rebel T5 / 1200D / Hi()
(*) Newly supported models
Hey,
Thank you for your time! Let me check if i can fix it. Currently we are very busy working on new release of our main product Wrap. As soon as it is released I will be able to add some modifications into the scanner. Sorry that we can not fix it right now as our team is very small.
Thank you again!
Take your time Andrew ,im not in a hurry.
Your priority is Wrap , so do your best at this wonderfull piece of software!
I thank you for your time .
Cheers,
Chris.
Here, also WIN7 64bit, I get the same QAccessibleWidget messages using a 550D.
If R3DS finds the cam (it has to be turned on starting R3DS) the scanner IS working here (also LiveView isn’t supported).
Therefor I run EOS utility to set the cam before opening R3DS (focus, exposure, ISO…).
I use a simple test pattern as desktop background to set the projector
After closing EOS utility I open R3DS and switch to calibration directly. Your should hear the EOS shooting while grabbing a calibration sequence.
Does that work for you?
No doesn’t work.When i switch to checkerboard calibration the '‘take calibration image’'button is greyed out.
Actually i have done these replacement tests but i didnt have any results.Maybe the dll versions wasnt correct.
Ok i did some progress.I managed to see the camera inside scanner(no live view although>no big deal) but…
1)When i start the capture in self-calibration it takes photos and as soon as the capture ends i have crash to desktop.
2)In order to take photos i need to have cameras screen on with a high delay (1000-1200) or else (screen off) nothing happens, shoots the pictures and my camera stucks
and when i go to see the photos in memory card show empty.Restarting the camera shows that the photos are actually there.
3)When i start in checker-board calibration i have crashes as soon as the taking of picures ends and so on…
Any thoughts?
I used dll’s from version 2.13 With 2.14(supports my camera) doesnt work.
Thx
Hell,
I have just tested the software using eos700d and can confirm it is not working at all.
I found my old 550d and can confirm that works with the software.
Hi Alexander, can you upload the new .dll again please?
I need that to test out my 650D and 800d please, much appreciate your help!
Hey, Great! thanks for sharing.